Thanks, I checked out the online manual but I guess I missed the section that lists the bolt sizes. I will take a closer look. I imagine they list a torque value. I would think there is a danger in getting the nuts too snug. Thanks for the opinion on the relative value of the manuals. I will also look into getting a new exhaust assembly - the one on the bike is looking pretty sad. Jeff
--- In Honda-C70@yahoogroups.com, Chris Bader <bader_ct@...> wrote:
>
> Hi,
>
> The stock exhaust has two half moon metal pieces between flange & exhaust port. While not remembering exact size, I believe you use 10mm wrench/socket for the nuts. If you go with new exhaust from dratv, then the half moon pieces are not necessary.
>
> You best bet is to download parts manual from group to get bolt size.
>
> The Haynes manual is not worth the money in my opinion as the repair manual (free - see footer of email) is the gospel. My Haynes manual gathers dust.
>
> Thanks,
>
> Chris=
>
> [Non-text portions of this message have been removed]
>
1970-73 C70 Honda Service Manual: http://tinyurl.com/6ebwtw
1970-73 C70 Troubleshooting Guide:
http://tinyurl.com/6ebwtw (scroll to sec.7.1 page 101.jpg)
1980-83 C70 Honda Service Manual: http://tinyurl.com/hu42c
1980-81 C70 Troubleshooting Guide:
http://tinyurl.com/hu42c (scroll to sec.18-1 page 170.jpg)
1982-83 C70 Troubleshooting Guide:
http://tinyurl.com/hu42c (scroll to sec. 20-28 page 205.jpg)
1980-81 C70 Maintenance Schedule: http://tinyurl.com/z4zn6
1982-83 C70 Maintenance Schedule: http://tinyurl.com/hw35c
More resources for C70 Passports and Cubs:
http://www.shlaes.com/Vehicles/Scooter.htm
http://www.velodrome.com/HondaC70/HondaC70.html
