That would be "flange" for all the spell-checkers in the group! Jeff
--- In Honda-C70@yahoogroups.com, "wjbyers@..." <wjbyers@...> wrote:
>
> I received all the parts to install the exhaust system to the head of my 1981 Honda Passport. I would like some feedback on how the fange should look in relationship to the head. First, I imagine the fange is not flush against the head - that there is some space between the fange and the head. Second, if there is supposed to be some space will the space to equal by both studs - or will there a slightly unequal spacing between the fange and the head. I guess I am wondering if there is some adjustment that needs to be made to the exhaust pipe curve out of the head (although I doubt this). I have never seen an assembled Passport exhaust system and the bike is new to me. By the way, for those of you that have helped me order the correct parts, the stud was not broken off; rather, the previous owner must have let the 6mm nut vibrate loose and the stud must have then also vibrated out of the head. I cleaned up the threads and the new stud when in, no problem. Thanks, Jeff
>
1970-73 C70 Honda Service Manual: http://tinyurl.com/6ebwtw
1970-73 C70 Troubleshooting Guide:
http://tinyurl.com/6ebwtw (scroll to sec.7.1 page 101.jpg)
1980-83 C70 Honda Service Manual: http://tinyurl.com/hu42c
1980-81 C70 Troubleshooting Guide:
http://tinyurl.com/hu42c (scroll to sec.18-1 page 170.jpg)
1982-83 C70 Troubleshooting Guide:
http://tinyurl.com/hu42c (scroll to sec. 20-28 page 205.jpg)
1980-81 C70 Maintenance Schedule: http://tinyurl.com/z4zn6
1982-83 C70 Maintenance Schedule: http://tinyurl.com/hw35c
More resources for C70 Passports and Cubs:
http://www.shlaes.com/Vehicles/Scooter.htm
http://www.velodrome.com/HondaC70/HondaC70.html
